manualshive.com logo in svg

Domino C Series, Operation And Maintenance Manual

Share
Download
Domino C Series Operation And Maintenance Manual Download Page 76

FORMATTING MESSAGES

76

77091 Issue 2 November 2003

Pallet Counting

Pallet counting is used for logging multiple product counts for bundling onto a
pallet.  The incremental box and pallet count can both be included in messages for
printing.

For example, if there are 20 boxes per pallet, count each box up to 20 as belonging
to pallet 1 - Pallet 1 Box 1, Pallet 1 Box 2 etc.  The 21st box is therefore the first
box on pallet 2 - Pallet 2 Box 1.
There are two parts to the pallet count procedure, both of which must be
performed correctly for pallet counting to commence.  First tell the system the
number of boxes per pallet for each message which uses pallet counting,  then
create a pallet count automatic attribute in those messages.

Setting Up Counting

To record how many boxes are held on each pallet, press together the keys labelled:

The following screen will appear:
2 line LCD models:

4 line LCD models:

Pallet 1 Box 1

Pallet 1 Box 8

Pallet 2 Box 13

or

Pallet count on

which msg?

Pallet count on

which message?

Summary of Contents for C Series





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands