Domino C Series Page 4 Operation And Maintenance Manual Download | Manualshive

Page: 4 / 92

background image

4

77091 Issue 2 November 2003

FCC Notice

This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the Federal Communication Commission
(FCC) Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial
environment.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful
interference to radio communication. Operation of this equipment in a residential
area is likely to cause harmful interference, in which case, the user will be required
to correct the interference at his own expense.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:

• Re-orientate or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected

• Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications not expressly approved by the manufacturer could
void the user's authority to operate the equipment.

TÜV CERTIFICATION

This product has been designed for maximum safety, and has been certified as such
by TÜV Product Services.
Modifications to this machine that are not approved by Domino, or the use of
non-Domino approved spares, will invalidate the CE mark and the TÜV
certification.

«
...
2
3
4
5
6
...
»

Summary of Contents for C Series





























































































Reviews:

No comments

Related manuals for C Series

Brand: Canon Pages: 11

imageRUNNER ADVANCE 8085

Brand: Canon Pages: 176

Brand: Canon Pages: 85

imageRUNNER 5070

Brand: Canon Pages: 4

imageRUNNER 5570

Brand: Canon Pages: 4

IMAGERUNNER 7095 PRINTER

Brand: Canon Pages: 8

IMAGERUNNER 7105

Brand: Canon Pages: 21

Brand: Canon Pages: 58

IMAGERUNNER ADVANCE C5051

Brand: Canon Pages: 12

imageRUNNER ADVANCE C2020

Brand: Canon Pages: 68

imageRUNNER ADVANCE 6055

Brand: Canon Pages: 134

Color imageRUNNER LBP5970

Brand: Canon Pages: 67

FAXPHONE L170 - B/W Laser - Copier

Brand: Canon Pages: 12

Brand: Canon Pages: 2

imageRunner 1133

Brand: Canon Pages: 60

Color imageCLASS MF8280Cw

Brand: Canon Pages: 36

Brand: Canon Pages: 104

imagePROGRAF iPF8300

Brand: Canon Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands