Domino A-SERIES, Operation And Maintenance Manual

Page: 86 / 337

REFERENCE
5--14 27080 Issue 1 August 98
Start MRC (A300/A200 only)
Inserts a marker indicating the start
of the MRC. Subsequent entries
into the message will be included in
the MRC, until
End MRC is
selected. The marker is shown on
the screen by a ”>” symbol.
End MRC(A300/A200 only)
Inserts the marker indicating the
end of the MRC. Entries before this
marker will be part of the MRC.
The marker is shown on the screen
by a ”<” symbol.
Also permits selection of the type of MRC and identifies the MRC as
first, second, etc, in the message. Further MRC parameters can be set
in
Advanced -- see below.
Machine Readable Code Identifier: Shows MRC identification number.
Code Type: Select 2/5 5 BARCODE / INTERLEAVED
2/5 BARCODE / CODE 39 BARCODE /
EAN 13 BARCODE / EAN 8 BARCODE /
UPC--A BARCODE / UPC--E BARCODE /
CODE 128 BARCODE / 2/5 INDUSTRIAL
BARCODE.
Function key options:
Cancel Return to previous screen without accepting
changes.
OK Accept new settings.
Advanced See below.
(END MRC) ADVANCED (A300/A200 only)
Permits the MRC details to be set
for use in the construction of the
MRC.
End
MRC