EN
Configuring the device with the remote control
CombiPower
94
“User Interface” menu (operating parameters)
Parameter
Explanation
Value range
Default
LCD
contrast
Sets the display contrast
0% – 100%
50 %
LCD
Auto-off
Determines the time after which
the display illumination is
switched off
0 s – 250 s
120 sec.
Buzzer
setting
Specifies if and when the remote
control buzzer is activated:
Disable
= deactivated
MSG
= Tone when switching on
and every time a button is
pressed
Alert
= Warning tone for fan fail-
ure, undervoltage, overload or
overtemperature
SHDN
= Warning tone when
shutting down the device due to
overvoltage, undervoltage, over-
load or overtemperature
Disable
SHDN
Alert
Alert, SHDN
MSG
MSG, SHDN
MSG, Alert
Msg, Alert, SHDN
Msg, Alert,
SHDN
Alert setting Determines the fault messages
the relay should report (see
chapter “Connecting the fault
display relay” on page 85):
Disable
= deactivated
Alert
= Alarm for fan failure,
undervoltage or overload
SHDN
= Alarm for overvoltage,
undervoltage, overload or over-
temperature
Disable
SHDN
Alert
Alert, SHDN
Alert,
SHDN
Shutdown
Retry
Determines how many times the
device is automatically started
after shutting down due to a
fault.
(Disable = never)
Disable, 1– 15
5
_CombiPower_IA_DE-IT.book Seite 94 Freitag, 21. Oktober 2011 8:10 20
