Dometic SPOTZERO SZIII 2000, User Manual & Installation Manual

Page: 28 / 59

Recommissioning the System After Storage
1. To recommission the system after the storage period, connect the
tube from the filters back to the bulkhead on the unit. Reconnect
the overboard connection back to the unit as well.
2. Fully open the by turning the handle counterclockwise. Fully close the
by turning it clockwise.
3. Turn on the water supply. Once the system recognizes water flow it will begin operation. Let the
unit flush for approximately 30 minutes. This is step 6 of the directions on the chemical cleaner
bottle.
4. After 30 minutes of flushing, power off the unit.
5. Reconnect the product to tank connection and fully open the recycle and concentrate valves by
rotating counterclockwise.
6. Once the system is ready for use, the concentrate and recycle flows will have to be dialed in as
instructed in the operating section.
WARNING
ENSURE ALL OF THE PRODUCT WATER DURING THE 30 MINUTE FLUSH IS
BEING DISCARDED OVERBOARD. THIS IS NON-POTABLE, HIGH PPM WATER
AND COULD FOUL PLUMBING FIXTURES AS WELL AS DISCOLOR OR STAIN
MATERIALS IT COMES IN CONTACT WITH.
CAUTION
Make sure to watch the product to tank bulkhead on the unit for any leaks during the flush period as
this could drip on equipment or leak into the bilge.
28