Dometic SMP 301-01, Installation And Operating Manual

Page: 20 / 148

EN
Installing the switching power supply SMP301
20
➤
Press the two tabs (fig.
9
3, page 8) in the direction indicated by the arrows and
lift the cover off (fig.
9
2, page 8).
➤
Connect the positive terminal of the consumer units to the flat plugs P1–P5
(fig.
2
6 – 10, page 3).
➤
Connect the negative terminal of the consumer units to one of the flat plugs P7
(any pin) (fig.
2
11, page 3).
➤
Connect the AC connection cable to the AC plug.
➤
Secure all cables with strain relief clamps.
SMP301-01/ -03/ -04/ -05/ -07/ -10
Please note that flat plugs P1–P6 are individually fused via plug-in fuses F1–F6 in the
following manner:
➤
Press the two tabs (fig.
9
3, page 8) in the direction indicated by the arrows and
lift the cover off (fig.
9
2, page 8).
➤
Connect the positive terminal of the consumer units to the flat plugs P1–P6
(fig.
3
6 – 10, page 4).
➤
Connect the negative terminal of the consumer units to one of the flat plugs P7
(any pin) (fig.
3
11, page 4).
➤
Connect the positive terminal of the battery to one of the flat plugs P6.
–
SMP301-01/ -03/ -04/ -05/ -10: z. B. fig.
1
12,page 3
– SMP301-07: fig.
6
4, page 5
➤
Connect the negative terminal of the battery to one of the flat plugs P7 (any pin).
–
SMP301-01/ -03/ -04/ -05/ -10: z. B. fig.
1
11,page 3
– SMP301-07: fig.
6
17, page 5
Flat plug Fuse Fuse assignment
Maximum permissi-
ble current
P1 F1 10 A 15 A
P2 F2 10 A 15 A
P3 F3 5 A 15 A
P4 F4 5 A 15 A
P5 F5 10 A 15 A
P6
Only SMP301-07
F6 20 A 20 A
SMP301-01-02-03-04-05-10--IO-7s.book Seite 20 Mittwoch, 23. Oktober 2019 11:56 11