3
EN
PRO TRIM™ Single/Dual Bezel Switch Assembly
Intended Use
1 .3 Supplemental Directives
To reduce the risk of accidents and injuries, please
observe the following directives before installing this
product:
• Read and follow all safety information and instructions
• Read and understand these instructions before
installing this product
• The installation must comply with all applicable local
or national codes, including the latest edition of the
following standards:
U .S .A .
– ANSI/NFPA70, National Electrical Code (NEC)
– American Boat and Yacht Council (ABYC)
1 .4 General Safety Messages
WARNING: ELECTRICAL SHOCK OR FIRE
HAZARD . Failure to obey the following
warnings could result in death or serious
injury:
• Use only Dometic replacement parts and
components that are specifically approved for use
with the product.
• Avoid improper installation, adjustment, alterations,
service, or maintenance of the product.
• Do
not
modify this product in any way. Modification
can be extremely hazardous.
2 Intended Use
The PRO TRIM™ Single/Dual Bezel Switch Assembly
(hereinafter referred to as “switch assembly” or
“product”) is designed and intended for installation on
a SeaStar Solutions/Dometic steering helm on a marine
craft.
The manufacturer accepts no liability for damage in the
following cases:
• Faulty assembly or connection
• Damage to the product resulting from mechanical
influences and excess voltage
• Alterations to the product
• Use for purposes other than those described in the
operating manual
Dometic Corporation reserves the right to modify
appearances and specifications without notice.
3 General Information
NOTICE:
Use only the hardware provided. Do
not
substitute.
These instructions describe how to install the switch
assembly onto the steering helm of a compatible marine
craft.
3 .1 Compatibility
Before beginning the installation, take a moment to
identify your steering system to be sure it is compatible
with the switch assembly.
Compatible Steering
Systems
1
Non-Compatible
Steering Systems
Xtreme™ Rotary Steering
Systems (Tilt and Non-tilt)
N/A
No Feedback™ (NFB) Rotary
Steering Systems (Tilt and
Non-tilt)
Big T
No Feedback™ (NFB) Rack
Steering Systems (Tilt and
Non-tilt)
N/A
Rack Steering Systems, 1984–
Present (Tilt and Non-tilt)
Rack Steering Systems
Before 1984
Optimus™ Tilt Steering
Systems
N/A
SH91800 and SH91900 Tilt
Steering Systems
N/A
HH4314-3 BayStar™ Steering
Systems, 2007–Present
BayStar Kits Before 2007
SeaStar™ Hydraulic Helms,
1991–Present (Tilt and Non-tilt)
SeaStar Hydraulic Helms
Before 1991
SeaStar Pro™ Hydraulic Helms
(Tilt and Non-tilt)
N/A
1
If your steering system is not listed, please call Dometic Technical Support
