Dometic MCS-CTRL, Installation And Operation Manual

Page: 6 / 44

6
EN
General Information Smart Touch Cabin Control
3 .5 Understanding the Home
Screen
This starting screen displays when the Smart Touch
Cabin Control is turned on.
w
r
e
u
t
y
q
3 Main Screen Icon Functions
No . Button Description
q
Force Sleep Forces the sleep mode to initiate
immediately, if sleep delay is on/enabled
with a press and release
w
Temperature Cycles through available set point(s)
(inside, outside, service, water, and
humidity temperatures) with a press and
release
e
Main Screen Displays the main screen with a press and
release
r
Status Indicates the system status (off, pending,
active, standby, or fault)
t
Up Displays the set point with a press and
release. Press and release the up icon as
many times as desired to increase the set
point. The set point increases one degree
with each press and release.
y
Down Displays the set point with a press and
release. Press and release the down icon
as many times as desired to decrease the
set point. The set point decreases one
degree with each press and release.
u
Power Toggle between On and Off with a press
and release
3 .6 Understanding the Main
Screen
Enter from the home screen to access the most basic
functions as well as the menu for more options.
e
q
w
t r
y
u
i
o
a
s
4 Main Screen Icon Functions
No . Button Description
q
Mode Changes the currently active mode
with a press and release
Auto Switches to cool or heat to satisfy
the temperature set point
Cool Indicates the system is in cooling
mode or when the unit is in an
automatic mode cooling cycle
Heat Indicates the system is in heating
mode or when the unit is in an
automatic mode heating cycle
Auxiliary Heat Indicates aux heat-only mode or
when the unit is in an automatic
mode auxiliary heating cycle
Dehumidification Controls humidity when the vessel is
unoccupied
w
Fan Mode Cycles through low, medium, high,
and auto fan speeds with a press
and release
e
Main Menu Displays the main menu with a press
and release
r
Fan Speed and
Mode Indicator
Above the line, indicates if the
fan speed is automatic or manual.
Displays the current speed below
the line.
t
Sensor Indicator Specifies which temperature is
displayed (inside, outside, service,
or water temperature) based on the
sensors installed.