MT400
Programming MagicTouch
EN
17
8
Programming MagicTouch
See fig.
e
8.1
Programmable functions
The standard settings are printed in
bold
.
8.2
Programming functions
➤
Open the vehicle door.
➤
Switch on the ignition.
➤
Press and hold the “Open” button and switch the ignition off.
➤
Let go of the button.
✓
The status LED and the hazard lights are lit continually.
✓
The system is now in programming mode.
➤
Select the corresponding setting in accordance with the table, see chapter “Programmable
functions” on page 17.
✓
The status LED and the hazard lights go out while the value is being saved.
✓
After 2 sec. you will receive a confirmation:
– After pressing the “Close” button: status LED and hazard lights flash once.
– After pressing the “Open” button: status LED and hazard lights flash twice.
✓
When the status LED and hazard lights are lit continually, the function has been programmed.
You can now program other functions or exit programming mode.
To exit programming mode:
➤
Switch on the ignition.
Function
Values
Press button
Activation time for central
locking system
3 sec.
0.7 sec.
1 x “Close” button
1 x “Open” button
Convenience function
activated
deactivated
2 x “Close” button
2 x “Open” button
Control for door contact switch
positive connection
negative connection
3 x “Close” button
3 x “Open” button
Control for hazard lights system
activated
deactivated
4 x “Close” button
4 x “Open” button
MT400--IO--16s.book Seite 17 Donnerstag, 25. August 2016 2:37 14
Summary of Contents for MagicTouch MT400
Page 4: ......
