EN
Maintaining and cleaning the DC kit
DC-Kit PP12, DSP-T12/24
24
•
Make sure that none of the housings and cables are not damaged and that all the
insulation is intact.
•
Compare the existing supply voltage against the technical data.
•
Do not insert any fingers or objects into component openings.
Stationary mode: AC mains supply mode
The system is supplied from the AC mains.
Driving mode: power supply from the battery
I
➤
Switch on the inverter using the remote control.
➤
Use the air conditioning unit as described in the operating manual.
8.2
Switching the system off
➤
First of all, switch off the air conditioning unit.
➤
If there are no more consumer units that need power, switch off the inverter using
the remote control.
9
Maintaining and cleaning the DC kit
A
I
➤
Clean the charging current distributor with a damp cloth from time to time.
➤
Check the power supply lines for abrasion or defects regularly.
➤
Have the system checked regularly by a specialist company.
➤
If you find any faulty fuses, have the system checked by a specialist company.
NOTE
See also: chapter “How the DC kit functions” on page 16.
NOTICE!
Do not use sharp or hard objects or cleaning agents for cleaning as these
may damage the product.
NOTE
Observe the maintenance and cleaning instructions in the operating
manuals of the individual components.
DC-Kit-PP12-DSP-T--IO-16s.book Seite 24 Freitag, 29. Juni 2018 7:17 19
