7
EN
CoolAir SPX1200I
Scope of delivery
5
Scope of delivery
6
Installation
A
6.1
Prescribed installation method
The parking cooler consists of the following components (fig.
3
):
•
CoolAir SPX1200C condenser unit (
2
)
•
CoolAir SPX1200I rear panel evaporator unit (
1
) with connecting line (
3
)
The condenser unit (
2
) is attached to the firm and straight rear panel of the cab or
by means of a firm fastening frame. The evaporator unit (
1
) is fitted on the inside
of the rear panel of the cab.
Item in
fig.
1
Part designation
Quantity
.
Evaporator unit with connecting cable
1
3
Insulating plate
1
$
Edge protection Ø 13 mm
1
/
Edge protection Ø 36 mm
1
1
Clip
4
4
Screw M6 x 10 mm
4
2
Cover for clip
4
(
Hood for rear panel
1
,
Self-tapping screw 3.5 x 9.5 mm
4
"
Plastic spacer L = 25 mm
4
0
Hexagon screw M6 x 40
4
#
Plastic spacer L = 40 mm
8
%
Hexagon screw M6 x 110
4
&
Washer M6 (d1 = 6.4 mm, d2 = 20 mm)
8
–
Remote control (incl. type CR2025 battery)
1
–
Evaporator unit installation template
1
NOTICE!
•
The parking cooler may only be installed by qualified personnel from a
specialist company. The following information is intended for specialists
who are familiar with the guidelines and safety precautions to be applied.
•
The evaporator unit must be installed in an upright position (fig.
2
).
63;,,VERRN6HLWH)UHLWDJ6HSWHPEHU
