19
The outputs can be configured in 5 different modes :
Stepping switch: Normal operating mode. Pressing on the button reverses the status of the
relays.
Push: The relay is active while the button is pressed and inactive when the button is
released.
Shut-off timer: Pressing on the button activates the relay. The relay is automatically
deactivated after the configured time. If the button is pressed when the relay is still active,
then the relay is deactivated. A long press activates the relay for the maximum possible
time (16 hours).
Continuous mode: Each press of the button activates the output for the time configured.
A long press activates the relay for the maximum possible time (16 hours).
Heating control: The relay is controlled by the associated temperature sensor.
4.9. CONFIGURATION OF THE GROUPS
Click on the icon
The DME-LAN-002 can be used to create up to 60 groups.
To create one or more groups, click on the (+) icon and enter the name of the group by
clicking into the name field (see figures 1 and 2 on page 15).
GROUPS
