33
6.4. «PARAMETERS» MENU
The first frame – «IP configuration» – (figure 34) is used to configure the parameters of the
DME-LAN-002 network. A restart is required when these parameters are changed (the
«
Save and Restart
» button saves the parameters and restarts the DME-LAN-002). The
default IP address is 192.168.1.210.
In order to restore this default IP address (if the address is unknown), simply press the reset
button on the card five times.
The second frame (figure below) is used to configure the time, date and day of the DME-
LAN-002 (this is important for events and temperature sensors).
The third frame (figure below) is used to define the location (by default, Brussels) and
whether it is summer or winter time (manual change via the «
Summer time
» box). The
calculation of sunrise and sunset times is based on this information.
