16
Confirm the composition of your installation by clicking on the (V) icon on the left of the
screen.
Careful: do not forget to configure the cards! (See below)
4.7. CONFIGURING THE SLAVE CARDS
For cards with 12 outputs
(DKS-012-002, DKS-012-016, DMC-012-002, DMC-012-016) :
When you turn a card on, you have a few seconds to press the button at the bottom to
light the BCE LEDs. If you did not manage to do this in time, cut the power to the card and
repeat the action.
DMC-012-002
A
B
C
D
E
By this stage, you have configured the card as a slave to the DME-LAN-002. All that
remains is to establish the address of the card, based on the instructions provided by
Home Manager. To do this, you must move to the left or right, depending on the LEDs.
For each card, press the buttons on the left and right until the LEDs light, in accordance
with what is shown in the diagram. In the example above, which pertains to the DMCV-
006-xx card, press the button on the right until only LED 3 is lit (
see figure 2, page 11
).
