© 2016 EnOcean | www.enocean.com
F-710-017, V1.2 TCM 330 / TCM 330U User Manual | v1.1 | August 2016 | Page 59/62
USER MANUAL V1.1
TCM 330 / TCM 330U
Wireless LED Controller Module
The device is capable to operate as a repeater, which can receive signals from the following
list of FCC/IC approved transmitters, and retransmit the signals.
TCM 330U:
n
PTM 210U
FCC ID:SZV-PTM210U
IC:
5713A-PTM210U
n
PTM 330U
FCC ID:SZV-PTM330U
IC:
5713A-PTM330U
n
STM 300U
FCC ID:SZV-STM300U
IC:
5713A-STM300U
n
STM 320U
FCC ID:SZV-STM320U
IC:
5713A-STM320U
n
STM 332U
FCC ID:SZV-STM332U
IC:
5713A-STM332U
n
TCM 300U
FCC ID:SZV-STM300U
IC:
5713A-STM300U
n
TCM 310U
FCC ID:SZV-STM300U
IC:
5713A-STM300U
n
TCM 320U
FCC ID:SZV-TCM320U
IC:
5713A-TCM320U
n
TCM 330U
FCC ID:SZV-STM300U
IC:
5713A-STM300U
OEM Requirements
In order to use EnOcean’s FCC ID number, the OEM must ensure that the following condi-
tions are met:
n
End users of products, which contain the module, must not have the ability to alter the
firmware that governs the operation of the module. The agency grant is valid only when
the module is incorporated into a final product by OEM integrators.
n
The end-user must not be provided with instructions to remove, adjust or install the
module.
n
The Original Equipment Manufacturer (OEM) must ensure that FCC labeling requirements
are met. This includes a clearly visible label on the outside of the final product. Attaching
a label to a removable portion of the final product, such as a battery cover, is not per-
mitted. The label must include the following text:
TCM 330U:
Contains FCC ID: SZV-STM300U
The enclosed device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (i.) this device may not cause harmful interference and (ii.) this
device must accept any interference received, including interference that may cause un-
desired operation.
When the device is so small or for such use that it is not practicable to place the statement
above on it, the information required by this paragraph shall be placed in a prominent loca-
tion in the instruction manual or pamphlet supplied to the user or, alternatively, shall be
placed on the container in which the device is marketed. However, the FCC identifier or the
unique identifier, as appropriate, must be displayed on the device.
The user manual for the end product must also contain the text given above.
