© 2016 EnOcean | www.enocean.com
F-710-017, V1.2 TCM 330 / TCM 330U User Manual | v1.1 | August 2016 | Page 27/62
USER MANUAL V1.1
TCM 330 / TCM 330U
Wireless LED Controller Module
4.4
Wireless switches
Energy harvesting wireless switches provide the flexibility and ease of use provided by
wireless solutions without the need for maintenance found in battery-operated devices.
Energy harvesting wireless switches can be freely positioned anywhere within the radio
range of LEDR. Setup is very easy as no wiring is required.
Energy harvesting wireless switches can be used in conjunction with LEDR to dim (adjust
the illumination level) up and down or to switch the light on (either to maximum or to pre-
defined brightness) and off.
Energy harvesting wireless switches can usually be either single rocker or dual rocker de-
signs. The picture below shows an example of each design for use with TCM 330U.
Additional product information for these energy harvesting switches can be found here:
https://www.enocean.com/en/enocean_modules_902mhz/wireless-switch-esrp-edrp-oem/
LED zone controller based on TCM 330 can accept input from up to 20 wireless switches
using EnOcean End Equipment Profile (EEP) F6-02-02.
