© 2016 EnOcean | www.enocean.com
F-710-017, V1.2 TCM 330 / TCM 330U User Manual | v1.1 | August 2016 | Page 38/62
USER MANUAL V1.1
TCM 330 / TCM 330U
Wireless LED Controller Module
4.6.2
Functionality depending on system configuration
The light level sensor can be used in three main system configurations:
n
Stand-alone
n
In combination with wireless switches
n
In combination with occupancy sensors
n
In combination with wireless switches and occupancy sensors
4.6.2.1
Light Level Sensor in Stand-alone Mode
Wireless light level sensor can be used without additional input devices such as wireless
switches. This can be useful to automatically switch ON and OFF lighting in places where
light switches and occupancy sensors are not commonly used or easily available.
One typical application would be a twilight switch where lighting is automatically turned ON
during darkness and OFF during daylight.
If the wireless light level sensor is used stand-alone then its reported data will directly con-
trol the output light level.
Both two level (ON / OFF) and five point (continuous) dimming can be used in this configu-
ration.
