10
|
Dolphin
|
BC 632
If desired, use the remote control to adjust the soap dispenser settings. Hold the remote
control straight in front of the sensor in a distance of about 4-6” (10-15cm).
ATTENTION:
Holding the soap dispenser remote control out of the recommended
range (too close or too far) may interfere with it’s activation.
1-SOAP QUANTITY
Press the + sign at the SOAP button to increase the soap quantity by increasing the
dispensing time and the – sign to decrease it. Indication: continuous blinking of the
blue light in the sensor eye.
2-AIR QUANTITY
To improve the soap “foamability” change the amount of the air to be mixed. Press the
+ sign at the AIR button to increase the air quantity and the - to decrease it.
Indication: 2 blinks of the blue light in the sensor eye.
3-RES
This function resets the sensor back to factory settings.
4-TEMPORARY OFF FUNCTION
This function temporary disable the dispenser and is ideal to perform any kind of activity
in front of the sensor without operating the system (for example, cleaning). The soap
dispenser will remain shut for one minute when this button is pressed once. To cancel
this function and to return to normal operation
press the On/Off button again or wait one minute.
5-FILL THE SOAP TANK
Once the soap tank has been filled \ re-filed, press
the FILL button. The pump would work for one
minute in order to fill the piping with soap.
To stop this activity press the FILL button again.
If the soap has not started coming out of the
spout, press the FILL button again.
Indication: continuous blinking of the blue light in
the sensor eye.
SETTINGS ADJUSTMENTS
1
2
4
5
3
1
2
4
2
5
33
