manualshive.com logo in svg

Dolphin BC632, Installation And Maintenance Manual, Page: 15 / 16

Share
Download
Dolphin BC632 Installation And Maintenance Manual Download Page 15

BC 632

|  

Dolphin

|  

15

TROUBLE SHOOTING

SOLUTION

CAUSE

 INDICATOR

 PROBLEM

Decrease the air ratio using the 
remote control.

Refer to page 8.

Air ratio is too high

Foam is too dense

Connect the connectors 
properly so that the white o-ring 
is not visible.

The connectors between the soap 
dispenser pump and the foam 
compressor are not connected 
properly.

Blue light 
flashes (once) 
and the foam 
compressor 
operates.

Foam dispenser 
pump does not work

Connect the connectors 
properly so that the white o-ring 
is not visible.

The connectors between the foam 
compressor and the electronic unit are 
not connected properly.

Blue light 
flashes (once) 
and the soap 
dispenser pump 
operates.

foam compressor 
does not work

Connect the connectors 
properly so that the white o-ring 
is not visible.

The connectors between the soap 
dispenser pump and the foam 
compressor are not connected 
properly.

Soap coming out of 
the spout does not 
stop

Connect the connectors 
properly so that the white o-ring 
is not visible.

The connectors between the 
compressor and the electronic unit are 
not connected properly.

Summary of Contents for BC632

















Reviews:

No comments