![background image](http://html1.mh-extra.com/html/chemchek/aqua-dual-mate-adm-series/aqua-dual-mate-adm-series_installation-and-maintenance-instructions_2595823001.webp)
Trouble Shooting
Action only to be performed by a
qualified person.
SYMPTOM
CAUSES
ACTION
No water
Water supply turned off
Check mains supply
No not hot
Faulty element
No power supply
Replace element
Check & test power
supply
Water overflowing
from tap spout
Expansion chamber full
Low inlet pressure
Run tap for 5-10 min
Contact manufacturer
Excessive steam
from tap
Faulty element
Replace element
N.B. These units are designed to have no less than
100ml of boiling water taken off at a time.
45 Rennie Drive, Airport Oaks, Mangere 2022
PO Bo x 43-047, Mangere, Manukau 2153
Phn: 09 275-5019 Fax: 09 921-2868
Email: [email protected] Web: www.chemchek.co.nz
To our valued customer...
A very special thank you for choosing to purchase and install our
ADM Series Aqua Dual Mate
INSTALLATION & MAINTENANCE INSTRUCTIONS
IMPORTANT...PLEASE READ
The
Aqua Dual Mate
dispenses boiling water – please treat with care.
This unit is fitted with a computerised element and boil dry protection.
The computer is set at 97°C, altitude will alter temperature (refer to
manufacture).
.
Do not switch on power without water running
out from the tap
•
•
•
•
Unit to be connected in accordance with AS3500.4.1 or AS/NZS
3500.4.2
•
•
•
•
If fitted with filter we recommend changing the cartridge every 6
months
•
•
•
•
The manufacturer recommends the cleaning and service of the
unit every 12 months
•
•
•
•
IF SUPPLIED CORD IS DAMAGED IT MUST BE REPLACED
BY AN AUTHORISED SERVICE AGENT (ELECTRICIAN).
Please leave these instructions with the owner
INSTALLATION INSTRUCTIONS