Dolmar TM-102.16, Operator'S Manual

Page: 117 / 254

19
EN
CONTROLS AND INSTRUMENTS
engagement or dis-engagement; this
can cause overheating and damage
the transmission belt.
When the
machine is in movement, keep your
foot off the pedal.
4.22 S
PEED CHANGE LEVER
This lever has seven positions for the 5 forward speeds, the neutral position «N»,
and reverse «R». To go from one speed to another, press the pedal (4.21) half way
and move the lever as per the indications on the label.
Reverse must only be engaged when the machine is
stopped.
For hydrostatic drive models:
4.31 B
RAKE PEDAL
This pedal works the brake on the rear wheels.
4.32 D
RIVE ENGAGEMENT PEDAL
This pedal engages drive in the wheels as well as modulating the machine's forward
and reverse speeds.
– To engage forward drive just press it
in the «F» direction with your toe-
cap, noting that increasing the pres-
sure on the pedal progressively
increases the speed of the machine
– Reverse is engaged by pressing the
pedal with the heel, in the «R» direc-
tion.
– The pedal automatically goes into
neutral «N» when released.
– The neutral condition «N» is shown
by the lighting of a pilot lamp
(4.10.e).
Reverse must
왖
!
WARNING!
➤
왖
!
WARNING!
NOTE
N
1 2
3 4
5
R
4.22
4.31
N
4.32
F
R