Dolmar PM-4601 S3C, Original Instruction Manual

Page: 10 / 244

10
4. TECHNICAL DATA
5. ASSEMBLY
5-1 ASSEMBLY THE FOLDING HANDLE
A) Fix the lower handlebars into the unit body with
locking knobs as shown. (Fig. 3, Fig. 4, Fig. 5, Fig. 6)
B) Release the upper handlebars for folding. Connect the
upper handle and the lower handle with the locking
knob.
(Fig. 7, Fig. 8)
C) Position all cables over the handle shafts. Clamp them
around the middle of lower handles by the cable
clamps so that the cables are fixed on the outside of
the machine. Otherwise the cables may be pinched by
opening/closing the rear cover or forced by folding the
upper handle.
(Fig. 9)
5-2 ASSEMBLY THE GRASS CATCHER
1. To fit: Lift the rear cover and hang the grass catcher on
the shaft of rear of mower. (Fig. 10, Fig. 11)
2. To remove: Grasp and lift the rear cover, remove grass
catcher.
5-3 STARTER HANDLE
Move the starter handle from the engine to the rope guide.
(Fig. 12, Fig. 13)
5-4 HEIGHT OF CUT
Apply outward pressure to disengage lever from rack.
Move lever forward or back to adjust height.
(Fig. 14 and
see clause 8-9)
6. ADJUSTMENT FOR AN
APPROPRIATE HEIGHT
1) Back out the locking knob which fixed the lower
handle, refer to Fig. 15 .
2) Refer to Fig. 16 , move the lower handle up and down,
adjust it to the proper height.
There is 3 adjusting height to be choose on this type
lawn mower; at 1 height, lower handle to the ground is
highest., 3 height is the lowest.
3) Adjusting to the proper height, then fix the lower
handle by the locking knobs.
WARNING: The left side and right side of lower
handle must adjust to the same height.
7. MULCHING MOWER
What is mulching?
When mulching, the grass is cut in one working step, then
finely chopped and returned to the grass strip as natural
fertilizer.
Hints for mulch-mowing:
- Regular cut-back by max. 2 cm from 6 cm to 4 cm
grass height.
- Use a sharp cutting knife.
- Do not mow wet grass.
- Set max. Motor speed.
- Only move at working pace.
- Regularly clean mulching wedge, housing inner side
and mowing blade.
Model PM-4601 SC PM-4601 S3C
Engine type B&S 650E series, ReadyStart B&S 675EX series, ReadyStart
Self Propel Yes Yes
Engine Displacement 190 cm
3
190 cm
3
Nominal Power 2.4 kW 2.5 kW
Blade Width 460 mm 460 mm
Idle Speed 2,800/min 2,800/min
Fuel Tank Capacity 1.0L 1.0L
Oil tank capacity 0.6L 0.6L
Grass catch bag capacity 60L 60L
Net Weight 33.8 kg 35.4 kg
Height adjustment 25 - 70 mm, 5 adjustment 25 - 70 mm, 5 adjustment
Guaranteed sound power level at the
operator's position
(According to EN ISO 5395-1 Annex F
& EN ISO 5395-2, EN ISO 4871)
81.5 dB (A)
(K = 3 dB (A))
83.1 dB (A)
(K = 3 dB (A))
Measured sound power level
93.1 dB (A)
K = 2.41 dB (A)
92.3 dB (A)
K = 2.75 dB (A)
Guaranteed sound power level
(According to 2000/14/EC)
96 dB (A) 96 dB (A)
Vibration
(According to EN ISO 5395-1 Annex G
& EN ISO 5395-2)
6.412 m/s
2
K = 1.5 m/s
2
7.535 m/s
2
K = 1.5 m/s
2