7
WARNING:
This machine produces an
electromagnetic field during operation. This field may
under some circumstances interfere with active or passive
medical implants. To reduce the risk of serious or fatal
injury, we recommend persons with medical implants to
consult their physician and the medical implant
manufacturer before operating this machine.
WARNING:
The operation of any tool
can result in foreign objects being thrown into your eyes,
which can result in loss of vision or serious eye injury.
Before beginning power tool operation, always wear
safety goggles or safety glasses with side shields and a
full face shield when needed. We recommend Wide
Vision Safety Mask for use over eyeglasses or standard
safety glasses with side shield.
1. This appliance is not intended for use by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and
knowledge, unless they have be given supervision or
instruction concerning use of the appliance by a
person responsible for their safety.
2. Children should be supervised to ensure that they do
not play with the appliance.
3. Read the instructions carefully.
4. Be familiar with the controls and proper use of the
equipment.
5. Before use, check the supply and extension cord for
signs of damage or ageing.
6. If the cord becomes damaged during use, disconnect
the cord from the supply immediately. DO NOT
TOUCH THE CORD BEFORE DISCONNECTING
THE SUPPLY.
7. Do not use lawn trimmer (edge trimmer), if the cords
are damaged or worn.
8. Warning: Cutting elements continue to rotate after the
motor is switched off.
9. Keep extension cords away from cutting elements.
10. Wear protective glasses or goggles.
11. Never allow children or people unfamiliar with the
instructions to use the machine.
12. Stop using the machine while people especially
children, or pets are nearby.
13. Only use the machine in daylight or good artificial light.
14. Before using the machine and after any impact, check
for sighs of wear or damage and repair as necessary.
15. Never operate the machine with damaged guards or
without the guards in place.
16. Keep hands and feet away from the cutting means at
all times and especially when switching on the motor.
17. Take care against injury from any device fitted for
trimming the filament line length. After extending new
cutter line, always return the machine to its normal
operating position before switching on.
18. Never fit metal cutting elements.
19. Never use replacement parts or accessories not
provided or recommended by the manufacturer.
20. Disconnect the machine from the mains before
checking, cleaning or working on the machine and
when it is not in use.
21. Always ensure that ventilation openings are kept clear
of debris.
22. Where symbols pictograms are used in the marking
on the machine their function shall be explained.
23. Always disconnect the trimmer from the mains when
leaving the trimmer unattended.
24. When not in use, store the machine out of the reach of
children.
25. Mains powered trimmers should only be repaired by
an authorized service center.
26. Ask an authorized service center for any repair or
adjustment other than described in this manual.
27. Use only manufacturer’s recommended replacement
parts and accessories.
Due to DOLMAR continuous product refinement
policy, product features and specification will change
without notice.
2. GENERAL IDENTIFICATION (Fig. 1)
1.
Safety lock button
2.
Auxiliary handle
3.
Lock knob
4.
Adjust button
5.
Main handle
6.
Switch trigger
7.
Tube
8.
Motor housing
9.
Safety guard
Accessories:
• Belt
• Eye protection glass
Summary of Contents for ET-40
