4
Do
L
ast
lever hoist • 03 / 2019
Read safe use instructions first and any
labels supplied with or attached to the
DD-lever hoist. Avoid unsafe use.
• in case of a used lever hoist check
service history and any damage.
• visually inspect hoist to ensure
there are no obvious defects lubricate
load chain prior first use.
• ensure chain and hooks are not
twisted or have kinks, nicks or cracks.
• check operation of brake both load-
ed and unloaded.
• ensure hook safety latches are fitted
and are functionally correctly.
• the top load hook of the lever hoist
must be securely fasten to the support-
ing structure.
• Make sure that the safety latch is
engaged.
In order to check the load brake raise
the load slightly first and stop again
before lifting the load completely.
Position block between load and sus-
pension point. Ensure hooks are seated
correctly and the safety latches are
engaged.
Free wheel:
Chain can be quickly adjusted to the
correct length by positioning the selec-
tor lever (50) to “N“ (= neutral). Turn the
hand wheel (27) counter clockwise until
it stops to disengage brake.
Chain can now be pulled freely in either
direction. Because DD-LB 025 doesn't
have a hand wheel pls proceed as
fo llows: disengage the chain lever in
“DN“ position and release the brake by
rota-ting the lever. Afterwards set the
lever to “FREE“. The chain can now be
pulled freely.
Important Notice:
In order to operate the brake mecha-
4. Operating instructions
WARNING:
Do not attempt to lift load in this
position. Do not attempt to select
freewheel under load.
3. Pre-installation instruction
Summary of Contents for DoLast Lever hoist DD Series
Page 22: ...www dolezych de...