Dolby
®
Model CP650 Installation Manual
Introduction
1-10
1.9 Regulatory
Notices
1.9.1 FCC
This equipment has been tested and found to comply with the limits for a Class F
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with this
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his or
her own expense.
1.9.2 Canada
This Class A digital apparatus complies with Canadian ICES-003.
1.9.3 UL
WARNING: Troubleshooting must be performed by a trained technician. Do not
attempt to service this equipment unless you are qualified to do so. Check that the
correct fuses have been installed. To reduce the risk of fire, replace only with
fuses of the same type and rating.
Exposed portions of the power supply assembly are electrically “hot.” In order to
reduce the risk of electrical shock, the power cord
must
be disconnected when the
power supply assembly is removed.
The ground terminal of the power plug is connected directly
to the chassis of the unit. For continued protection against
electric shock, a correctly wired and grounded (earthed)
three-pin power outlet must be used. Do not use a ground-
lifting adapter and never cut the ground pin on the three-
prong plug.
1.9.4 UK
The power cord supplied for use in Europe (Dolby Part No. 92021) is not suitable for use
in the UK. To use the cord in the UK cut off the CEE7/7 plug and replace with an
approved BS 1363 13A plug:
•
The core that is coloured green and yellow must be connected to the terminal in the plug identified
by the letter
E
or by the earth symbol
or coloured green or green and yellow.
•
The core that is coloured blue must be connected to the terminal that is marked with the letter
N
or
coloured black.
•
The core that is coloured brown must be connected to the terminal that is marked with the letter
L
or coloured red.
This apparatus must be earthed.
