Döhmann Helix Two, Installation & Operation Manual

Page: 16 / 18

HELIX TWO Mk2 INSTALLATION & OPERATION GUIDE
16
DA-MAN-H2-003 www.dohmannaudio.com
The Data & External Power Port
Each Döhmann Helix Two Mk2 has a Data and external power port on the rear panel. This port is used to
connect the external power supply however can also be used by an approved technician to facilitate the
transfer of data to the turntable’s electronics (software upgrades, etc).
Helix Two Features
 State-of-the-art custom designed Swiss-manufactured motor
 Micro Signal Architecture© (MSA)
 Negative Stiffness Mechanism Vibration Isolation (NSM)
 Mechanical Crossover Technology (MCT)

Tri-Modal Platter system (TMP)
 Edge Damping Ring (EDR)
 Tone arm Damping System (TDS)
 Resonance Tuned Suspension (RTS)
 Diamond Like Coating Amorphous Material Bearing Friction Modifier (DLC)
 High Torque Adjustable Drive (HTAD)
 Facility for one tonearm