HELIX TWO Mk2 INSTALLATION & OPERATION GUIDE
9
DA-MAN-H2-003
www.dohmannaudio.com
STEP 5
STEP 5
STEP 5
STEP 5
Place a soft blanket or cloth on a flat surface to place the platter on. Remove the platter from the top
compartment solid foam and place it on the blanket with the bearing side up. Remove the soft plastic bearing
protector on the underside of the bearing to reveal the bearing assembly on the bottom of the platter.
Remove the soft plastic bearing protector from the inverted bearing post on the chassis.
STEP 6
STEP 6
STEP 6
STEP 6
Perform an initial levelling of the chassis by winding each of the four feet up or down. Use a bubble level on
the top plate of the chassis as a starting point. Visually check each foot to ensure that all four are firmly
connecting with the surface of the shelf that the turntable is placed on.
STEP 7
STEP 7
STEP 7
STEP 7
Fasten the record clamp to the spindle. The record clamp is the designed to also be the most secure handle to
move the platter into placement position. Check that the twin belts are sitting in the matching grooves on the
platter.
Loop the supplied brightly coloured string (or any suitable string/cord) behind both belts to enable the belts to
be pulled over the motor spindle with ease.