60
BATTERY CHARGER
The battery charger and charging cables allow you to
charge both the transmitter and receiver at the same
time. The battery charger is designed for a 220-volt
wall outlet (12-volt field charger for Lithium-
Polymer batteries for your automobile are also
available.).
To use the battery charger for the two-dog unit,
combine both sets of battery charging (splitter) cables
as shown. This enables you to charge the transmitter
and both receivers at the same time.
NOTE :
Only use Dogtra-approved Lithium-Polymer
Battery Chargers for your Dogtra beeper
collar. This will prevent any damage that
can be incurred from attempting to use a
different chargerThe battery charger.
BATTERY CHARGER
61
TESTING
1. To activate the , you should
place the red dot on the back of the transmitter to
the red dot on the receiver/collar. And hold the two
red dots together for a moment until the green
color LED indicator light comes on.
The receiver/collar emits the Power-on melody
and turns on.
2. Turn the transmitter on by pressing the blue button
on the right side of the transmitter.
The LCD screen shows the amount of battery life
remaining and the LED blinks once every 4
seconds (The battery needs charging, if the color
of the LED is red or the LCD battery icon shows 1
bar.).
3. You should make sure whether the toggle switch is
located where you want between “GR” and “OR”.
If you select the orange collar, set the toggle
switch on the “OR” and to choose the green collar,
set it on the “GR”.
TESTING YOUR
COLLAR
Charging Cable
220 volt
Charger
Wall Outlet
Two-dog unit only