52
BUTTON FUNCTION
The transmitter for the
has
five buttons (two on the face of the transmitter,
two on the left side, and one on the right side).
“Run/Point” Button
The Run/Point button is located on the front of
the transmitter.
If you push down the Run/Point button, the unit
causes double beep every 7 seconds while the dog
is running. While the dog is on point or stationary
it double beeps every 2 seconds.
BUTTON FUNCTION
Lccate
Run/Point
ON/OFF
Switch
Sound
Point
53
BUTTON FUNCTION
“Point” Button
The Point button is below the Run/Point button on
the front of the transmitter.
The unit will not beep while the dog is moving in
case the Point button is pressed (you can use the
Locate mode for locating your dog); however when
the dog points or becomes stationary, the unit will
emit a double beep every 2 seconds.
(
Orange Collar
: double beep,
Green Collar
:
single beep)
“Locate” Button
The “Locate” button is located on the left side. It
causes the collar’s beeper horn to emit a series of
beeps when the button is pushed and it gives you
the ability to keep track of your dog’s location. The
current selected sound lasts as long as the Locate
button is pushed down, for up to 12 seconds.
“Sound” Button
The Sound button is located below the Locate
button on the left side of the transmitter.
It has four different sounds.