DCS HQR1 DVR User
’s Manual
- 51 -
4)
Power off and then insert CF card into HQR1-C4 DVR.
5)
Turn on the power.
6)
The firmware will be upgraded after power on. The LED turns to red, then
yellow and alternately flashes red and yellow several times. It takes about
two minutes to upgrade.
At the same time, LCD will display schedule of upgrade process if you
upgrade from Firmware V1.0.4 or newer.
When the DCS HQR1-C4 DVR upgrades successfully, it will reboot
automatically.
* DON’T TURN OFF POWER DURING THIS PERIOD!!
7)
The HQR1-C4 DVR will be rebooted automatically after upgrade. The LED will
change to red, yellow and then green. It takes about 12 seconds to reboot.
8)
A Beep will sound once the DCS HQR1 DVR is rebooted successfully.
9)
Power off 4 Channel HQR1-C4 DVR, then power on 4 Channel DCS HQR1
DVR-C4 again
*
.
* To Upgrade 4 Channel HQR1-C4 DVR, after reboot, you must power
off & power on the 4 Channel HQR1-C4 DVR manually.
The file, updmgr.txt, will be found under the root of CF card. The phrase of
following can be found in the content of updmgr.txt.
kernel image: image.2510.img[Sun Oct 15 03:33:24 2006] == (Mon Apr 2
03:33:24 2007)
The date and time correspond to the version of firmware. Upgrade is successful
if the date and time is the same as the data and time kernel generated.
* Power supply has to be guaranteed normal while upgrading. DCS HQR1 DVR can
not be restored if upgrade fail.
* Wait at least 4-5 minutes till reboot successful. LED keeps constant green if
reboot successful.
