DCS HQR1 DVR User
’s Manual
- 35 -
Lap Timer
Configuration of Lap Timer
Set device information in
DCS HQR1 DVR Desktop Software
.
Set Beacon Enable to receive Beacon signal. The default is disable.
The
Time Stamp
will be disabled when you enable the beacon function.
The Beacon Configuration option is only for the special edition of DCS HQR1 DVR
with Lap Timer function.
Connection
Simply connect the External Beacon Receiver into the Beacon jack on the DCS
HQR1 DVR and point the External Beacon Receiver to the Beacon. The Lap Timer
will start to work when Beacon signal is detected.
Mask Time
The Mask Timer is the time interval that DCS HQR1 DVR doesn’t respond after
the detection of Beacon signal. The default value is 10 sec.
Recording of Lap Time
The time of each lap is record in the DVR_xxx.txt file. The file will look like:
