III. Setting Up
1. Charge the devices respectively for 2 hours and above.
Remote Control:
Charge the device until the battery icon on the display
indicates full bars.
Receiver:
Charge the device until the red LED turns green. The display
on the Remote will indicate full bars as well.
1.
Thread the collar through the Receiver.
2.
If your dog has thick fur, please
separate the fur
at the
electrodes with a comb to enable them to reach the skin.
IV. Wearing the Receiver Collar
2. Configurating Static Levels:
Press and hold
Static Level Regulator Activation Button
and simultane-
ously slowly rotate
Static Level Regulator
until the digit on the screen
reaches a suitable strength.
Recommended Static Level strength starts from “10”
. This is the
minimum sensation your dog can feel. The right static level goes down to
individual basis which you should
find out from your dog’s responses
.
The sensitivity to static depends on your dog’s size and weight, amount of
fur, and even skin condition.
8