1. Only when both electrodes are simutaneously touched, shock will work.
2. If collar has a delayed reaction or fails to sync up even in short distance, make sure there is no strong
signal interference in your surroundings. The remote's range could be affected by obstacles,
electromagnetic field, or even stormy weather.
3. If you find collar cannot work, please check whether you push the lock button on which is on the left
side of remote.
4.The sensitivity to static depends on your dog's
siz weight, amount of fur, and even skin condition.
When wearing the collar, it is most suitable if
one finger
can be insert
ed under it.
Too tight
is not good for your dog, but
too loose
will dull
the static function for the electrodes cannot touch your dog’s skin.
If your dog has thick
fur, please
separate
the fur apart
so that
both electrodes can
touch the skin
.
Make sure protective
silicone caps
are off
the electrodes. They
can dull the static
sensation sent to your
dog.
COLLAR STATIC STIMULATION
QUICK GUIDE
Not feelling the SHOCK? Try these solutions.
Note:
One last thing you
cantry is to
shear the
fur
where both electr-
odes aretouched.
Water can help con-
duct electricity If you
spray some water
around the electrodes,
the shock function can
be feltmore effectively.
including
Silicone Caps
for electrodes
Receiver
Static Electrodes
USB Charging Port
& Rubber Lid
Sound
Speaker
LED Status
Light
6
