‘beeps’
‘vibrates’
‘beeps’
‘vibrates’
VII. Training Tips
VI. Match the Remote Control to the Receiver:
1. Reward your dog with food
will usually help to achieve the best
result.
2.
Do not use the device on
dogs aged below 6-month
, old, pregnant,
easily frightened, aggressive, in heat, old, and dogs not in best of health.
*You may
skip this step
because the set is already paired by factory
setting.
Connect the Receiver to a power source via the USB
cable, matching mode can only be activated during
charging.
Press and hold
Channel Switch / Match Button
for
5 secs
. The
Receiver will vibrate and beep which indicates the matching is complete.
You will see
“1”
(or subsequent number) in the Channel Display if matching
is successful.
Adding multiple Receivers:
Connect your
additional Receiver
to a power source
.
Press and hold
Channel Switch /Match Button
for
5 secs
(repeat steps
2.1 and 2.2).
The
Channel Display will show the subsequent number of the new Receiver.
Note:
Connect only 1 Receiver at a time, do not connect all simultaneously,
or the Remote will match all Receivers into a single channel.
Removing all Matched Receivers:
Press and hold Static Level Regulator Activation Button and Beep Button
simultaneously for 8 secs. The Channel Display will default to “0”. Note:
Make sure all Receivers you want to remove have power and in the effective
range, so that Receivers could receive the remove command.
10
