Transfer Bench
by
Item: 1475
ENSURE THAT ALL PUSH BUTTONS “CLICK” INTO POSITION.
DO NOT USE PRODUCT IF PUSH BUTTONS ARE DAMAGED IN ANY WAY.
THE FOUR LEGS OF THE LARGE SEAT REST IN THE BATHTUB. THE TWO LEGS OF THE SMALL SEAT REST ON THE BATHROOM FLOOR.
ADJUST LEGS TO ENSURE THE BENCH AS A WHOLE UNIT IS LEVEL AND STABLE BEFORE USING.
ASSEMBLY
Flip over small seat and insert two
legs into holes at bottom of seat on
the side without the clips.
Flip over large seat and insert four legs
into holes at bottom of seat. Ensure
white button “clicks” into place.
Insert back rest into large seat.
Insert small seat into side slots in
large seat as shown.
Push in brass coloured button and slide
inner tube up or down to adjust to desired
height. Ensure button “clicks” into place.
Ensure transfer bench is level before use. If Easy
On/Easy Off feature is not required (see over),
ensure seat clips are securely “locked” into position.
1 Small Seat
1 Large Seat
1 Back Rest
6 Legs
DO NOT USE ANY CRACKED OR DAMAGED COMPONENTS.
COMPONENTS
1
2
3
4
5
6
WARRANTY:
This warranty is extended to the original purchaser of this product for a period of one year from the original purchase date against defects in materials and/or workmanship and is dependent that the product has
been used in the intended fashion as outlined in this manual. Those items not warrantied are rubber tips. Any installation, service and/or labour charges are at the discretion of the vendor and are not the responsibility of
Parsons ADL. Any parts damaged by improper installation, repair and/or alteration by an unauthorized agency or individual, or parts damaged by neglect, accident or misuse on the part of the agency or individual are not
warrantied. Parsons ADL’s sole liability extends to repair or replacement of parts or components as previously specified. The foregoing is in lieu of any other warranties expressed or implied, whether written or oral.
All manuals and user guides at all-guides.com
