Dodge Durango 2012, Owner'S Manual

Page: 250 / 682

NOTE: HomeLink
威
is disabled when the Vehicle Secu-
rity Alarm is active.
Before You Begin Programming HomeLink
姞
Be sure that your vehicle is parked outside of the garage
before you begin programming.
For more efficient programming and accurate transmis-
sion of the radio-frequency signal it is recommended that
a new battery be placed in the hand-held transmitter of
the device that is being programmed to the HomeLink
威
system.
Erase all channels before you begin programming. To
erase the channels place the ignition in the ON/RUN
position and press and hold the two outside HomeLink
威
buttons (I and III) for up 20 seconds or until the red
indicator flashes.
NOTE:
•
Erasing all channels should only be performed when
programming HomeLink
威
for the first time. Do not
erase channels when programming additional buttons.
•
If you have any problems, or require assistance, please
call toll-free 1–800–355–3515 or, on the Internet at
www.HomeLink.com for information or assistance.
HomeLink
威
Buttons/Sunvisor/Headliner
248 UNDERSTANDING THE FEATURES OF YOUR VEHICLE