Dodge Caliber Owner'S Manual Download Page 106

Page: 106 / 397

General Information

This device complies with part 15 of the FCC rules and
RSS 210 of Industry Canada. Operation is subject to the
following conditions:

•

This device may not cause harmful interference.

•

This device must accept any interference received,
including interference that may cause undesired op-
eration.

SEATS

Front Seat Adjustment

The adjusting bar is at the front of the seats, near the
floor. Pull the bar up to move the seat to the desired
position.

Using body pressure, move forward and rearward on the
seat to be sure the seat adjusters have latched.

Front Seat Adjustment

106

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for Caliber














































































































































































































































































































































































































Search results

Summary of Contents for Caliber

Reviews:

Related manuals for Caliber

Brands by name

Popular brands

Dodge Caliber, Owner'S Manual

Search results

Summary of Contents for Caliber

Reviews:

Related manuals for Caliber

Brands by name

Popular brands