Dodge Caliber, Owner'S Manual

Page: 94 / 397

entries. To use this feature, dial the number you wish to
call and then press the “Voice Recognition” button and
say “Send.” The system will prompt you to enter the
name or number, say the name of the phonebook entry
you wish to send. The UConnect™ will then send the
corresponding phone number associated with the phone-
book entry as tones over the phone.
NOTE:
•
You may not hear all of the tones due to cellular phone
network configurations, this is normal.
•
Some paging and voicemail systems have system
timeout settings too short that may not allow the use
of this feature.
Barge In - Overriding Prompts
The “Voice Recognition” button can be used when you
wish to skip part of a prompt and issue your voice
recognition command immediately. For example, if a
prompt is playing
9
Would you like to pair a phone, clear
a
{
,
9
you could press the “Voice Recognition” button and
say
9
Pair a Phone
9
to select that option without having to
listen to the rest of the voice prompt.
Turning Confirmation Prompts On/Off
Turning confirmation prompts off will stop the system
from confirming your choices (e.g., the UConnect™
system will not repeat a phone number before you dial
it).
•
Press the “Phone” button to begin.
•
After the
9
Ready
9
prompt and the following beep, say
9
Setup Confirmations.
9
The UConnect™ system will
play the current confirmation prompt status and you
will be given the choice to change it.
Phone and Network Status Indicators
If available on the radio and/or on a premium display
such as the instrument panel cluster, and supported by
your cell phone, the UConnect™ system will provide
94 UNDERSTANDING THE FEATURES OF YOUR VEHICLE