Dodge Caliber Owner'S Manual Download Page 239

Page: 239 / 397

Recommended Shift Speeds

To use your manual transaxle for optimal fuel economy,
it should be upshifted as listed in table.

Manual Transaxle Recommended Shift Speeds

Units in mph (km/h)

Engine

Size

Accel-

eration

Rate

1 to 2

2 to 3

3 to 4

4 to 5

All En-

gines

Accel

14 (23) 23 (37)

29 (47)

45 (72)

Cruise

12 (19) 18 (29)

25 (40)

32 (52)

Downshifting

Proper downshifting will improve fuel economy and
prolong engine life.

CAUTION!

If you skip more than one gear while downshifting
or downshift at too high a vehicle speed, you could
damage the engine, transmission, or clutch.

To maintain a safe speed and prolong brake life, shift
down to 2nd or 1st gear when descending a steep grade.

When turning a corner, or driving up a steep grade,
downshift early so that the engine will not be overbur-
dened.

STARTING AND OPERATING

239

Summary of Contents for Caliber














































































































































































































































































































































































































Search results

Summary of Contents for Caliber

Reviews:

Related manuals for Caliber

Brands by name

Popular brands

Dodge Caliber, Owner'S Manual

Search results

Summary of Contents for Caliber

Reviews:

Related manuals for Caliber

Brands by name

Popular brands