Dodge 2014 dodge challenger Owner'S Manual Download Page 418

Page: 418 / 548

(B) Setting Up To Use TIREFIT:

1. Turn the Mode Select Knob (5) to the Sealant Mode

position.

2. Uncoil the Sealant Hose (6) and then remove the cap

from the fitting at the end of the hose.

3. Place the TIREFIT kit flat on the ground next to the

deflated tire.

4. Remove the cap from the valve stem and then screw

the fitting at the end of the Sealant Hose (6) onto the
valve stem.

5. Uncoil the Power Plug (8) and insert the plug into the

vehicle’s 12 Volt power outlet.

NOTE:

Do not remove foreign objects (e.g., screws or

nails) from the tire.

•

Always start the engine before turning ON the TIRE-
FIT kit.

NOTE:

Manual transmission vehicles must have the

parking brake engaged and the shift lever in NEUTRAL.

•

After pressing the Power Button (4), the sealant (white
fluid) will flow from the Sealant Bottle (1) through the
Sealant Hose (6) and into the tire.

NOTE:

Sealant may leak out through the puncture in the

tire.

416

WHAT TO DO IN EMERGENCIES

Summary of Contents for 2014 dodge challenger





































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2014 dodge challenger

Reviews:

Related manuals for 2014 dodge challenger

Brands by name

Popular brands

Dodge 2014 dodge challenger, Owner'S Manual

Search results

Summary of Contents for 2014 dodge challenger

Reviews:

Related manuals for 2014 dodge challenger

Brands by name

Popular brands