Dodge 2014 dodge challenger Owner'S Manual Download Page 303

Page: 303 / 548

Removing The Button

1. The ENGINE START/STOP button can be removed

from the ignition switch for key fob use.

2. Insert the metal part of the emergency key under the

chrome bezel at the 6 o’clock position and gently pry
the button loose.

NOTE:

The ENGINE START/STOP button should only

be removed or inserted with the ignition in the OFF
position (OFF position for Keyless Enter-N-Go™).

Normal Starting

Using The ENGINE START/STOP Button –
Automatic Transmission Only

1. The transmission must be in PARK or NEUTRAL.

2. Press and hold the brake pedal while pressing the

ENGINE START/STOP button once.

3. The system takes over and attempts to start the

vehicle. If the vehicle fails to start, the starter will
disengage automatically after 10 seconds.

4. If you wish to stop the cranking of the engine prior to

the engine starting, press the button again.

NOTE:

Normal starting of either a cold or a warm

engine is obtained without pumping or pressing the
accelerator pedal.

Using The ENGINE START/STOP Button –
Manual Transmission Only

1. Press and hold the clutch pedal while pressing and

holding the ENGINE START/STOP button.

2. Release the button when the engine starts. If the

vehicle fails to start within 15 seconds, release the
button, wait 10 to 15 seconds, then repeat the “Normal
Starting” procedure.

STARTING AND OPERATING

301

Summary of Contents for 2014 dodge challenger





































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2014 dodge challenger

Reviews:

Related manuals for 2014 dodge challenger

Brands by name

Popular brands

Dodge 2014 dodge challenger, Owner'S Manual

Search results

Summary of Contents for 2014 dodge challenger

Reviews:

Related manuals for 2014 dodge challenger

Brands by name

Popular brands