Dodge 2014 dodge challenger Owner'S Manual Download Page 314

Page: 314 / 548

CAUTION!

•

If you skip more than one gear while downshifting
or downshift at too high an engine speed, you
could damage the engine, transmission, or clutch.

•

Do not downshift into first gear when the vehicle is
moving faster than 15 mph (24 km/h), as you could
damage the engine and/or clutch.

AUTOMATIC TRANSMISSION — IF EQUIPPED

CAUTION!

Damage to the transmission may occur if the follow-
ing precautions are not observed:

•

Shift into PARK only after the vehicle has come to
a complete stop.

(Continued)

CAUTION!

(Continued)

•

Shift into or out of REVERSE only after the vehicle
has come to a complete stop and the engine is at
idle speed.

•

Do not shift between PARK, REVERSE, NEU-
TRAL, or DRIVE when the engine is above idle
speed.

•

Before shifting into any gear, make sure your foot
is firmly pressing the brake pedal.

NOTE:

You must press and hold the brake pedal while

shifting out of PARK.

312

STARTING AND OPERATING

Summary of Contents for 2014 dodge challenger





































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2014 dodge challenger

Reviews:

Related manuals for 2014 dodge challenger

Brands by name

Popular brands

Dodge 2014 dodge challenger, Owner'S Manual

Search results

Summary of Contents for 2014 dodge challenger

Reviews:

Related manuals for 2014 dodge challenger

Brands by name

Popular brands