manualshive.com logo in svg

Dodge 2013 Dart, Owner'S Manual

The Dodge 2013 Dart User Manual is an essential companion for owners of this sleek and powerful vehicle. Discover the comprehensive guide to operating and maintaining your Dart, available for free download at manualshive.com. Get the most out of your Dart with this practical and informative user manual.

Share
Download
background image

CAUTION!

•

Damage to the fuel system or emission control
system could result from using an improper fuel
cap (gas cap). A poorly fitting cap could let impu-
rities into the fuel system. Also, a poorly fitting
aftermarket cap can cause the “Malfunction Indi-
cator Light (MIL)” to illuminate, due to fuel vapors
escaping from the system.

•

A poorly fitting gas cap may cause the MIL to turn
on.

•

To avoid fuel spillage and overfilling, do not “top
off” the fuel tank after filling.

WARNING!

•

Never have any smoking materials lit in or near
the vehicle when the gas cap is removed or the
tank is being filled.

•

Never add fuel when the engine is running. This is
in violation of most state and federal fire regula-
tions and may cause the malfunction indicator
light to turn on.

•

A fire may result if gasoline is pumped into a
portable container that is inside of a vehicle. You
could be burned. Always place gas containers on
the ground while filling.

NOTE:

•

When the fuel nozzle “clicks” or shuts off, the fuel
tank is full.

470

STARTING AND OPERATING

Summary of Contents for 2013 Dart







































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2013 Dart

RaceChip Pro 2 Installation Manual preview
Pro 2
Brand: RaceChip Pages: 12
Jeep UNIVERSAL CJ-2A Operation Data preview
UNIVERSAL CJ-2A
Brand: Jeep Pages: 27
Jeep RENEGADE 2016 User Manual preview
RENEGADE 2016
Brand: Jeep Pages: 228
Jeep PATRIOT 2013 User Manual preview
PATRIOT 2013
Brand: Jeep Pages: 108
Jeep PATRIOT 2013 Owner'S Manual preview
PATRIOT 2013
Brand: Jeep Pages: 525
KRAFTWERK Automotive 31006 Instructions preview
Automotive 31006
Brand: KRAFTWERK Pages: 2
WABCO TP19108 Installation Manual preview
TP19108
Brand: WABCO Pages: 32
RBP STEALTH POWER RBP-216-SP Installation Manual preview
STEALTH POWER RBP-216-SP
Brand: RBP Pages: 16
HURST STREET SUPER SHIFTER Installation Instructions preview
STREET SUPER SHIFTER
Brand: HURST Pages: 2
Toyota Sienna 2021 Manual preview
Sienna 2021
Brand: Toyota Pages: 600
Safe Fleet RVS systems RVS-M641 Instruction Manual preview
RVS systems RVS-M641
Brand: Safe Fleet Pages: 24
C-KO RS-4-18-R-I Fitting Instructions preview
RS-4-18-R-I
Brand: C-KO Pages: 4
Belkin F8V9017 User Manual preview
F8V9017
Brand: Belkin Pages: 2
Quadratec 11113.1435 Quick Start Manual preview
11113.1435
Brand: Quadratec Pages: 14
Kia Bluetooth Phone System 2010 Reference Manual preview
Bluetooth Phone System 2010
Brand: Kia Pages: 16
Whelen Engineering Company LED Dominator TAM83S2 Installation Manual preview
LED Dominator TAM83S2
Brand: Whelen Engineering Company Pages: 2
newmotion Dynamic Power Management Home - Module Installation Instruction preview
Dynamic Power Management Home - Module
Brand: newmotion Pages: 20
Grillo PK 1400 Operator'S Manual preview
PK 1400
Brand: Grillo Pages: 71

Brands by name

Popular brands

Load more brands