Dodge 2013 Dart Owner'S Manual Download Page 478 | Manualshive

Page: 478 / 614

background image

Weight-Distributing Hitch

A weight-distributing hitch system works by applying
leverage through spring (load) bars. They are typically
used for heavier loads, to distribute trailer tongue weight
to the tow vehicle’s front axle and the trailer axle(s). When
used in accordance with the manufacturer’s directions, it
provides for a more level ride, offering more consistent
steering and brake control and thereby enhancing towing
safety. The addition of a friction/hydraulic sway control
also dampens sway caused by traffic and crosswinds,
contributing positively to tow vehicle and trailer stability.
Trailer sway control and a weight distributing (load equal-
izing) hitch are recommended for heavier Tongue Weights
(TW) and may be required depending on Vehicle and
Trailer configuration/loading to comply with GAWR
requirements.

Trailer Hitch Classification

The following chart provides the industry standard for
the maximum trailer weight a given trailer hitch class can

tow and should be used to assist you in selecting the
correct trailer hitch for your intended towing condition.
Refer to the Trailer Towing Weights (Maximum Trailer
Weight Ratings) chart for the Maximum GTW towable
for your given drivetrain.

Trailer Hitch Classification Definitions

Class

Max. Trailer Hitch

Industry Standards

Class I - Light Duty

2,000 lbs (907 kg)

Class II - Medium Duty

3,500 lbs (1 587 kg)

Class III - Heavy Duty

5,000 lbs (2 268 kg)

Class IV - Extra Heavy Duty

10,000 lbs (4 540 kg)

Refer to the “Trailer Towing Weights (Maximum
Trailer Weight Ratings)” chart for the Maximum
Gross Trailer Weight (GTW) towable for your given
drivetrain.

All trailer hitches should be professionally installed on
your vehicle.

476

STARTING AND OPERATING

«
...
476
477
478
479
480
...
»

Summary of Contents for 2013 Dart







































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2013 Dart

Brand: A-Tach Mounts Pages: 2

Brand: Camoplast Pages: 60

Brand: Federal Signal Corporation Pages: 8

Brand: Federal Signal Corporation Pages: 8

2011 Corolla LE

Brand: Toyota Pages: 19

Brand: Prorack Pages: 14

Brand: Cadillac Pages: 522

Brand: A-Tach Pages: 2

Brand: RAM Pages: 496

Brand: Carcomm Pages: 2

Brand: Abrams Pages: 12

S90 - ACCESSORY PANEL

Brand: Volvo Pages: 166

Brand: Grillo Pages: 71

Brand: Prorack Pages: 14

T13 Outback Frontal Protection System

Brand: T.J.M. Pages: 18

Brand: Audi Pages: 4

Brand: Volvo Pages: 62

Brand: Safe Fleet Pages: 28

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands