Dodge 2013 Dart Owner'S Manual Download Page 143

Page: 143 / 614

•

Uconnect™ Phone will play the new text message for
you.

After reading a message, you can “Reply” or “Forward”
the message using Uconnect™ Phone.

Send Messages:

You can send messages using Uconnect™ Phone. To send
a new message:

•

Press the

button.

•

After the “Ready” prompt and the following beep, say
“SMS Send” or “Send Message.”

•

You can either say the message you wish to send or say
“List Messages.” There are 20 preset messages.

To send a message, press the

button while the

system is listing the message and say “Send.”

Uconnect™ Phone will prompt you to say the name or
number of the person you wish to send the message to.

List of Preset Messages:

1. Yes

2. No

3. Where are you?

4. I need more direction.

5. L O L

6. Why

7. I love you

8. Call me

9. Call me later

10. Thanks

11. See You in 15 minutes

12. I am on my way

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

141

Summary of Contents for 2013 Dart







































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2013 Dart

Reviews:

Related manuals for 2013 Dart

Brands by name

Popular brands

Dodge 2013 Dart, Owner'S Manual

Search results

Summary of Contents for 2013 Dart

Reviews:

Related manuals for 2013 Dart

Brands by name

Popular brands