Dodge 2012 Ram Truck Gas 1500 Owner'S Manual Download Page 44 | Manualshive

Page: 44 / 726

Dodge 2012 Ram Truck Gas 1500 Owner'S Manual Download Page 44

collision the belt will lock and reduce the risk of you
striking the inside of the vehicle or being thrown out.

WARNING!

•

Wearing a seat belt incorrectly is dangerous. Seat
belts are designed to go around the large bones of
your body. These are the strongest parts of your
body and can take the forces of a collision best.

•

Two people should never be belted into a single
seat belt. People belted together can crash into one
another in a collision, hurting one another badly.
Never use a lap/shoulder belt or a lap belt for more
than one person, no matter what their size.

•

It is dangerous to ride in a cargo area, inside or
outside of a vehicle. In a collision, people riding in
these areas are more likely to be seriously injured
or killed.

(Continued)

WARNING! (Continued)

•

Do not allow people to ride in any area of your
vehicle that is not equipped with seats and seat
belts.

•

Be sure everyone in your vehicle is in a seat and
using a seat belt properly.

•

Wearing your belt in the wrong place could make
your injuries in a collision much worse. You might
suffer internal injuries, or you could even slide out
of part of the belt. Follow these instructions to
wear your seat belt safely and to keep your pas-
sengers safe, too.

Lap/Shoulder Belt Operating Instructions

1. Enter the vehicle and close the door. Sit back and
adjust the seat.

42

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

«
...
42
43
44
45
46
...
»

Summary of Contents for 2012 Ram Truck Gas 1500























































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments