Dodge 2012 Ram Truck Gas 1500 Owner'S Manual Download Page 18 | Manualshive

Page: 18 / 726

Dodge 2012 Ram Truck Gas 1500 Owner'S Manual Download Page 18

WARNING! (Continued)

•

Do not leave children or animals inside parked
vehicles in hot weather. Interior heat build-up may
cause serious injury or death.

CAUTION!

An unlocked car is an invitation to thieves. Always
remove the key from the ignition and lock all doors
when leaving the vehicle unattended.

Key-In-Ignition Reminder

Opening the driver’s door when the Key Fob is in the
ignition and the ignition switch position is OFF or ACC,
a chime will sound to remind you to remove the Key Fob.

NOTE:

•

The Key-In-Ignition reminder only sounds when the
Key Fob is placed in the OFF or ACC ignition position.

•

If equipped with Electronic Vehicle Information Cen-
ter (EVIC) the EVIC will display “Key In Ignition”.

SENTRY KEY

姞

The Sentry Key

威

Immobilizer System prevents unauthor-

ized vehicle operation by disabling the engine. The
system does not need to be armed or activated. Operation
is automatic, regardless of whether the vehicle is locked
or unlocked.

The system uses a Key Fob with a factory-mated Remote
Keyless Entry (RKE) transmitter and Wireless Ignition
Node (WIN) to prevent unauthorized vehicle operation.
Therefore, only Key Fobs that are programmed to the
vehicle can be used to start and operate the vehicle. The
system will not allow the engine to crank if an invalid
Key Fob is used to start and operate the vehicle. The
system will shut the engine off in two seconds if an
invalid Key Fob is used to start the engine.

16

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

«
...
16
17
18
19
20
...
»

Summary of Contents for 2012 Ram Truck Gas 1500























































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments