Dodge 2012 Ram Truck Gas 1500 Owner'S Manual Download Page 235

Page: 235 / 726

4. Rotate the handles to the horizontal position to secure
into place.

WARNING!

To reduce the risk of potential injury or property
damage:

•

Cargo must be secured.

•

Do not exceed cargo load rating of your vehicle.

•

Secure all loads to truck utilizing cargo tie downs.

•

Extender should not be used as cargo tie down.

•

When vehicle is in motion do not exceed 150 lbs
(68 kg) load on the tailgate.

•

The bed extender is not intended for off road use.

•

When not in use, the extender/divider should be in
stowed or divider position with the tailgate closed.

•

When in use all handles are to be in the locked
position.

Locking Tab

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

233

Summary of Contents for 2012 Ram Truck Gas 1500























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2012 Ram Truck Gas 1500

Reviews:

Dodge 2012 Ram Truck Gas 1500, Owner'S Manual, Page: 235 / 726

Search results

Summary of Contents for 2012 Ram Truck Gas 1500

Reviews: