Home
/
Dodge
/
2012 Ram Truck Gas 1500
/
Owner'S Manual

Dodge 2012 Ram Truck Gas 1500, Owner'S Manual, Page: 331 / 726

Share

Page: 331 / 726

Dodge 2012 Ram Truck Gas 1500 Owner'S Manual Download Page 331

3. Touch the 1 or 2 soft-key based on the channel you
want to change and then the DISC soft-key in the MEDIA
column. To exit touch the back arrow at the top left of the
screen.

NOTE:

•

To view a DVD on the radio press the RADIO/MEDIA
hard-key, on the radio faceplate, then touch the DISC
tab soft-key and then the VIEW VIDEO soft-key.

•

Viewing a DVD on the Touch-Screen radio screen is
not available in all states/provinces, and the vehicle
must be stopped, and the shift lever must be in the
PARK position for vehicles with automatic transmis-
sion. In vehicles with manual transmission the parking
brake must be engaged.

•

Touching the screen on a Touch-Screen radio while a
DVD is playing brings up basic remote control func-
tions for DVD play such as scene selection, Play,
Pause, FF, RW, and Stop. Pressing the X in the upper
corner will turn off the remote control screen
functions.

Rear VES Soft-key

4

UNDERSTANDING YOUR INSTRUMENT PANEL

329

«
...
329
330
331
332
333
...
»

Summary of Contents for 2012 Ram Truck Gas 1500























































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments