Dodge 2012 Ram Truck Gas 1500 Owner'S Manual Download Page 225

Page: 225 / 726

CAUTION!

Failure to follow the following items could cause
damage to the vehicle:

•

Assure that all cargo inside the storage bins is
properly secured.

•

Do not exceed cargo weight rating of 150 lb (68 kg)
per bin.

To open a storage bin, press and release the button
located on the lid. The RamBox

威

lid will open upward to

allow hand access. Lift the lid to fully open.

RamBox

威

Pushbutton And Lock

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

223

Summary of Contents for 2012 Ram Truck Gas 1500























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2012 Ram Truck Gas 1500

Reviews:

Dodge 2012 Ram Truck Gas 1500, Owner'S Manual, Page: 225 / 726

Search results

Summary of Contents for 2012 Ram Truck Gas 1500

Reviews: